|
|
| 第 71 行： |
第 71 行： |
| USB 鼠标在[[安全模式]]或 legacy-free PC 上的 MiniWindows 下无法正常工作。此版本中未实现对 ACPI 标志 <code>LEGACY_DEVICES</code> 的拟议更改。解决方案是从 <code>PRECOPY2.CAB</code> 中提取 <code>Winboot.lf</code> 到启动驱动器的根目录，并将其重命名为 <code>IO.SYS</code>。 | | USB 鼠标在[[安全模式]]或 legacy-free PC 上的 MiniWindows 下无法正常工作。此版本中未实现对 ACPI 标志 <code>LEGACY_DEVICES</code> 的拟议更改。解决方案是从 <code>PRECOPY2.CAB</code> 中提取 <code>Winboot.lf</code> 到启动驱动器的根目录，并将其重命名为 <code>IO.SYS</code>。 |
|
| |
|
| === Hibernation === | | === 休眠 === |
| * While there have been a lot of progress has been made with Hibernation since the previous build, there are still issues with Hibernate in this build. It is highly recommended that you do a clean install or upgrade from [[Windows 98]] or [[Windows 98 SE]], and not upgrade over a [[Windows Me build 2332.2|previous build of Millennium]] if planning to test hibernate. Older registry settings used in the previous build will conflict with this build. | | * 虽然自上一个版本以来，休眠已经取得了很大的进展，但在这个版本中，休眠仍然存在问题。强烈建议你从 [[Windows 98]] 或 [[Windows 98 第二版 Build 2222A|Windows 98 第二版]]进行全新安装或升级，如果计划测试休眠，不要在[[Windows Me Build 2332.2|以前的 Millennium 版本]]上进行升级。上一个版本中使用的旧注册表设置将与此版本冲突。 |
| * It is no longer necessary to use the Video Repost Flag workaround. If you have set this flag, follow these instructions on how to remove this flag from your system: | | * 不再需要使用 Video Repost Flag（视频转发标志）解决方法。如果你已设置此标志，请按照以下说明从系统中删除此标志： |
| ** Open Registry Editor, and navigate to the <code>HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Display</code> key. You should see a key named 0000. If you have other keys like this (such as 0001, 0002) you need to remove the following key under each of the additional entries. To do this: | | ** 打开注册表编辑器，然后导航到 <code>HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Display</code> 键。你应该看到一个名为 0000 的键。如果你有其他类似的键（例如 0001、0002），则需要在每个附加条目下删除以下键。为此，请执行以下操作： |
| **# Expand the 0000 key. | | **# 展开 0000 键。 |
| **# Select the DEFAULT key. | | **# 选择 DEFAULT 键。 |
| **# Look for a string called "Repost", then select it and press the {{Key press|Delete}} key, and select Yes to confirm the deletion. | | **# 查找名为“Repost”的字符串，然后选择它并按 {{Key press|Delete}} 键，然后选择“是”以确认删除。 |
| **# Repeat from step 1 if you have additional keys such as 0002, 0003, etc. | | **# 如果你有其他键（如 0002、0003 等），请从步骤 1 开始重复。 |
| **# Reboot your system, and attempt to hibernate again. | | **# 重新启动系统，然后尝试再次休眠。 |
| * Certain systems may experience problems with Hibernate if the computer is using the Intel PRO/100+ Management Adapter. This is a known issue. The workaround is to open Device Manager, expand the Network Adapters branch and open the Properties for the Intel PRO/100+ Management Adapter. If you have a tab for Power Management, select it and unselect the "Allow the computer to turn off this device to save power". Close the properties dialog and reboot your system before trying to Hibernate again. | | * 如果计算机正在使用 Intel PRO/100+ Management Adapter（英特尔 PRO/100+ 管理适配器），某些系统可能会遇到休眠问题。这是一个已知问题。解决方法是打开设备管理器，展开网络适配器分支，然后打开英特尔 PRO/100+ 管理适配器的属性。如果你有“电源管理”选项卡，请选择它并取消选择“Allow the computer to turn off this device to save power（允许计算机关闭此设备以节省电量）”。关闭属性对话框并重新启动系统，然后再尝试休眠。 |
| * System hangs at "Switching to protect mode" when trying to resume from hibernate. Resume times can take up to 30 seconds or longer once you have reached the "Switching to protect mode" screen. | | * 尝试从休眠状态恢复时，系统在“切换到保护模式”时挂起。到达“切换到保护模式”屏幕后，恢复时间可能需要长达 30 秒或更长时间。 |
| * This build does not support power management for SCSI devices. Systems that have SCSI CD-ROM drives hard disks will fail to resume from Hibernate or stand by. | | * 此版本不支持 SCSI 设备的电源管理。具有 SCSI CD-ROM 驱动器硬盘的系统将无法从休眠状态恢复或待机。 |
|
| |
|
| === Docking === | | === Docking === |