文档:安装 Milestone 3 Windows 8 ARMv7 builds 在真实 ARMv7 硬件上：修订间差异
跳转到导航
跳转到搜索
文档:安装 Milestone 3 Windows 8 ARMv7 builds 在真实 ARMv7 硬件上 (查看源代码)
2025 年 8 月 14 日 (四) 14:12 的版本
、 2025 年 8 月 14 日 (星期四)PlaceHolder
小 （PlaceHolder） |
小 （PlaceHolder） |
||
| 第 1 行： | 第 1 行： | ||
=== Prerequisties === | === Prerequisties === | ||
The following requirements used in order to install this build onto a [[ | The following requirements used in order to install this build onto a [[wikipedia:Surface_(2012_tablet)|Surface RT]] or [[wikipedia:Lenovo IdeaPad Yoga 11|Lenovo IdeaPad Yoga 11]]{{efn|Also known as the NEC LaVie Y in Japan, referred to as the Yoga 11 in this guide.}} are listed below: | ||
* A Surface RT or Lenovo IdeaPad Yoga 11 with Secure Boot disabled; | |||
* The build that the user wishes to install | * The build that the user wishes to install | ||
* A USB drive of at least 4GB capacity | * A USB drive of at least 4GB capacity | ||
| 第 9 行： | 第 10 行： | ||
=== Precautions === | === Precautions === | ||
* This guide is intended to be used on builds in the [[Windows 8 Build 7957.0.fbl_core1_kernel_npc.110302-1700|7957 (fbl_core1_kernel_npc)]] to [[Windows 8 Build 8061.0.fbl_core1_soc.110803-1830|8061 (fbl_core1_soc)]] range. | * This guide is intended to be used on builds in the [[Windows 8 Build 7957.0.fbl_core1_kernel_npc.110302-1700|7957 (fbl_core1_kernel_npc)]] to [[Windows 8 Build 8061.0.fbl_core1_soc.110803-1830|8061 (fbl_core1_soc)]] range. | ||
* As of 2025, only the WinPE of build 7957 can be booted due to the lack of a working <code>sdbus.sys</code> driver. | * As of 2025, only the [[预安装环境|WinPE]] of build 7957 can be booted due to the lack of a working <code>sdbus.sys</code> driver. | ||
* The Surface RT uses <code>ACPIPatcherOffset1.efi</code>, while the Lenovo IdeaPad Yoga 11 uses <code>ACPIPatcherOffset0.efi</code>. | * The Surface RT uses <code>ACPIPatcherOffset1.efi</code>, while the Lenovo IdeaPad Yoga 11 uses <code>ACPIPatcherOffset0.efi</code>. | ||
* Certain builds may require the <code>setup.exe</code> executable to be ran from the <code>sources</code> directory of the installation media instead of the WinPE's, as Windows will fail to verify the product key when inputting it into the Setup. | * Certain builds may require the <code>setup.exe</code> executable to be ran from the <code>sources</code> directory of the installation media instead of the WinPE's, as Windows will fail to verify the product key when inputting it into the Setup. | ||
* This guide has not been tested on the ASUS VivoTab RT and will not work on [[ | * This guide has not been tested on the ASUS VivoTab RT and will not work on [[wikipedia:Qualcomm_Snapdragon|Snapdragon]]-based devices. | ||
=== Instructions === | === Instructions === | ||